Give your garage floor a hard-wearing, showroom finish with the DIY Epoxy Flake Floor Kit from DIY Epoxy Australia. This complete garage floor epoxy kit turns tired, plain concrete into a clean, durable, great-looking surface that shrugs off hot tyres, oil, dropped tools and foot traffic - and you can roll it on yourself over a weekend.
Epoxy flake flooring is the most popular finish for home garages for good reason: the decorative vinyl flakes hide slab imperfections, add natural slip resistance underfoot, and disguise everyday dirt and tyre marks so the floor looks great for years. It is just as at home in workshops, sheds, laundries and alfresco areas (add our non-slip additive for wet areas).
You can save thousands installing it yourself rather than paying a professional applicator, and our easy 3-step installation manual walks you through every stage. Phone support is available if you get stuck.
What's in the kit
0-20m² Kit
1x 500g Etch & Clean (surface prep)
1x 1.65L Primer Kit
1x 2L Coloured Base Coat Kit
1x 500g Flake Pack
1x 2L Clear Coat Kit
Covers approximately 15-20m², depending on concrete porosity and texture.
20-40m² Kit
1x 1kg Etch & Clean
1x 3.3L Primer Kit
1x 4L Coloured Base Coat Kit
1x 1kg Flake Pack
1x 4L Clear Coat Kit
Covers approximately 35-40m², depending on concrete porosity and texture.
Why choose this kit
Complete system - prep, primer, colour base, flakes and clear top coat in one order, all matched to your floor area.
Tough, easy-clean finish - resists oil, chemicals, abrasion and hot tyre pick-up.
Suits bare concrete and masonry, internal or external.
DIY-friendly - clear instructions and phone support, no special tools beyond our Epoxy Application Kit.
A single garage is typically 18-21m² and a double 36-40m² - not sure which kit you need? See our coverage guide or get in touch with your measurements and we'll help you size it.
