What’s in the kit
- 1× Etch & Clean surface prep — 500g single garage · 1kg double
- 1× Primer Kit — 1.65L single · 3.3L double
- 1× Coloured Base Coat Kit — 2.5L single · 5L double
- 1× Clear Coat Kit — 2L single · 4L double
Single-garage kits cover approximately 15–20m² and double-garage kits 35–40m², depending on concrete porosity and texture.
For a clean, modern, uniform finish, the DIY Plain Colour Epoxy Floor Kit from DIY Epoxy Australia is the simplest way to transform a garage floor. This complete epoxy floor kit coats tired, plain concrete in a smooth, solid colour that is hard-wearing, easy to sweep and mop, and built to handle hot tyres, oil, dropped tools and daily traffic.
A plain colour garage floor epoxy gives the cleanest, smoothest look - ideal for modern garages, workshops and sheds where you want a uniform finish rather than the decorative flake texture. (Planning to wash the car or work in wet conditions? Add our non-slip additive to the top coat for extra grip.)
You can save thousands installing it yourself instead of hiring a professional, and our easy 3-step installation manual covers every stage. Phone support is available if you need a hand. Suitable for bare concrete and most masonry surfaces, internal or external.
Oversized kits with ample material - the best priced, complete epoxy floor system on the market.
What's in the kit
0-20m² Kit
- 1x 500g Etch & Clean (makes 7.5L of solution)
- 1x 1.65L Primer Kit
- 1x 2.5L Coloured Base Coat Kit
- 1x 2L Clear Coat Kit
Covers approximately 15-20m², depending on concrete porosity and texture.
20-40m² Kit
- 1x 1kg Etch & Clean (makes 15L of solution)
- 1x 3.3L Primer Kit
- 1x 5L Coloured Base Coat Kit
- 1x 4L Clear Coat Kit
Covers approximately 35-40m², depending on concrete porosity and texture.
Built for first-timers, not just the trade
Commercial suppliers will sell to you, but the products just aren’t user friendly. With short work times of 20 minutes or less and thick, hard-to-apply coatings, your chances of success are much better with our user-friendly coatings. With over an hour of work time and easy application using just a paint roller, a perfect finish is easily achievable.
Plain colour vs flake
Choose plain colour for the smoothest, most modern, easiest-to-clean finish. Prefer to hide slab imperfections and add built-in grip? Our DIY Epoxy Flake Floor Kit is the decorative alternative. Both use the same proven system and roll on over a weekend.
A single garage is typically 18-21m² and a double 36-40m². Not sure which size to order? See our coverage guide or send us your measurements and we'll help you choose.
Planning your install
- How hard is it?
- DIY-friendly. Rolls on with standard tools - the 3-step manual walks you through each stage, and phone support is a call away if you get stuck.
- Time on the tools
- About 10 hours of work spread over 3-4 days: etch and patch day 1, prime and base coat after the slab dries, clear coat the day after.
- When can I use the floor?
- Light foot traffic after about 2 days. Give it up to a week before parking the car so the coating reaches full hardness.
- Which size kit?
- A single garage (18-21m²) needs the 0-20m² kit. A double garage (36-40m²) needs the 20-40m² kit. Coverage varies with concrete porosity.
- How tough is it?
- Resists hot tyre pick-up, oil, chemicals and abrasion. Built for garages, workshops, sheds and high-traffic concrete.
- DIY vs professional
- A professionally installed garage floor typically costs thousands more for the same finish. This kit: from $469, one weekend of your time.
Flake vs plain colour at a glance
| Flake kit | Plain colour kit | |
|---|---|---|
| Look | Decorative speckled finish | Smooth, uniform, modern |
| Hides slab imperfections | Excellent - flakes disguise marks and repairs | Shows more - best on tidy slabs |
| Grip underfoot | Natural slip resistance from the flake texture | Smoothest finish - add non-slip additive for wet areas |
| Cleaning | Hides everyday dirt and tyre marks | Easiest to sweep and mop |
| Price | From $499 (0-20m²) / $729 (20-40m²) | From $469 (0-20m²) / $699 (20-40m²) |
| System | Same proven 3-step system - etch, prime, coat - rolled on over a weekend | |
Want built-in grip and a finish that hides imperfections? See the DIY Epoxy Flake Floor Kit. Still deciding? Read our flake vs plain colour guide.
Complete the job
Etch & Clean surface prep is already in your kit. Depending on your slab, you may also need:
